eHouse CAN/RF smart home system measurement, regulation events

eHouse CAN/RF Home Automation – measurements, control and events

This article covers both “eHouse CAN” and “eHouse RF” versions.
Smart Home eHouse CAN/RF controllers allows the measurement of physical values:

  • voltage
  • temperature
  • lighting
  • force of the wind
  • humidity
  • etc..

and their regulation, turning on/off appropriate actuators.
Continue reading eHouse CAN/RF smart home system measurement, regulation events

eHouse CAN/RF intelligent home drives control events

eHouse CAN/RF Intelligent home Control rollers, gateways, drives, servos, solenoid regulatory – events

This article covers “eHouse CAN” and “eHouse RF” controllers.
Smart House eHouse CAN/RF version allows you to control various types of electromechanical actuators used for:

  • management blinds , awnings , gates, gateways, windows drives
  • regulatory control solenoid (+ , – ) For controlling the flow, temperature and other physical values

Continue reading eHouse CAN/RF intelligent home drives control events

eHouse CAN/RF intelligent home output events

eHouse CAN/RF Intelligent home control devices – Events for digital outputs

This article covers “eHouse CAN” and “eHouse RF” controllers.
home automation eHouse for CAN architecture have a controlled and programmable intelligent digital outputs, which may operate in different modes:

  • 4 independent intelligent outputs (for switching electrical appliances On/Off )
  • Two independent pairs of intelligent outputs ( to control shutters , drives the gates , window awnings , regulatory solenoid valves , etc. )
  • 2 single outputs and one double ( output pairs )
  • 3 – 4 outputs controlled together (future)

within 1 eHouse CAN/RF intelligent controller.
Continue reading eHouse CAN/RF intelligent home output events

“eHouse CAN/RF” Smart Home – connection outputs to appliances

“eHouse CAN/RF” Smart Home – connect relay outputs to electrical devices

eHouse CAN home automation , connect the controller to the electrical and electronic equipment.
This information covers “eHouse CAN” and “eHouse RF” controllers.
The information contained herein is for informational not as guide.
Connecting to voltages greater than 50V requires installation by a qualified electrician (depending on jurisdiction). In the case of voltage 230V is necessary to turn off all fuses. Continue reading “eHouse CAN/RF” Smart Home – connection outputs to appliances