eHouse Smart House Demo – package Evaluative

Smart Home , home Automation eHouse is relatively advanced system and how each similar system is based on the assumptions of the design selected and supported by over 14 years of experience and development of the system aimed at :

• Achieving maximum functionality while ensuring high profitability of the system
• minimum budget, comfort , prestige system versions
• open system that allows independent design , configurations , installations , software , etc..
• Independence from expensive, dedicated components such as ( dedicated panels , devices with its own logic )

To break the myth construction-project that:

• the first house we built for the enemy
• second for sale
• third for himself

we provide Evaluation/demonstration module for :

• installers
• investors
• subcontractors
• designers

enabling :

• independent , optimal design and flawless installation of the smart home , building automation and other control systems
• allows you to design a eHouse system , To maximize the functionality and hardware resources of microprocessor controllers
• allows you to manually configure the eHouse system and empirical explanation of the discrepancy between theory and practice
• allows you to test the configuration and home automation system , on ” short ” even before the construction or installation laying in buildings
• Early testing of electronic home installations will significantly increase “satisfaction factor” out of the house after the introduction and allow the elimination of unnecessary elements
• test the system for eHouse smart home demonstration plant significantly accelerate the start-up of the production plant at home , building or apartment
• Obtaining the final configuration of the first turn on the system eHouse ensuring certainty that the system is working properly
• allows you to check the driver in case of doubt
• provides a fully functional test environment eHouse system through the implementation based on the sample installation of the connected switches , temperature sensors , light sensor , LEDs attached to digital output and PWM dimmers
• Allows you to fully test all eHouse 1 system drivers ( RoomManager, HeatManager, ExternalManager ) and others about the power supply 5V

The main functions of the evaluation – demonstration module home control system eHouse :

• Demo module is made on the set of A4 which is a miniature of the building automation system and the whole system of total control devices in homes and other types of construction
  • lighting
  • heating
  • security system
  • blinds , awnings , gates , wickets
  • recuperator , boiler , central heating , ventilation , thermal energy
• testing RoomManager
  • digital inputs ( 12pcs ) connected to the switches ( push button)
  • measuring input light level – connected to the light sensor
  • 7 other inputs are connected to sensors measuring temperature
  • digital control outputs connected to LEDs which indicate output states
  • 3 dimmers PWM outputs connected to LEDs showing the level of dimming lighting
  • Configuration set in the software eHouse (* demo)
• testing HeatManager
  • Dedicated digital outputs for control of central heating , ventilation , recuperative , acquisition , etc. .
    Control:
    • boiler pump , fireplace , solar collectors , water heater , radiators , underfloor heating , cooler
    • electro – three-way valve for fluid temperature control heater , radiators or underfloor heating
    • cylinders intake , ground heat exchanger , bypass ‘ ‘ in the recuperator
    • shutdowns , fuel feeder
    • booster fans intake , GWC , fireplace , DGP ( Distribution of hot air from the fireplace )

    LEDs are connected to the

  • Signaling and alarm outputs connected to LEDs allow to understand and test the control algorithms HeatManager
    • the fire alarm , boiler , solar collectors
    • signaling heating hot water tank and CO
  • All measurement inputs (16 ) connected to the temperature sensors ( simulation and the temperature change can be obtained, for example using the dryer )
    • External Temperature PN
    • External Temperature PD
    • Internal temperature ( For Reference )
    • temperatures – Metering recuperator (all inputs and outputs)
    • Supply air temperature for the ground heat exchanger
    • The temperature of the water heater , against distributors for radiators or underfloor heating
    • The temperature of the water jacket 2 sensors for security
    • Temperature Convection fireplace ( for indication of operation and DGP )
    • Tank temperature CO / DHW – 3 sensors (top , measure , down)
    • Temperature Boiler
    • The temperature of the solar collector
• testing ExternalManager
  • All outputs ( Rollers , Marquis , gateways , wickets , blocked outlets , sirens , Warnings ) connected to the LEDs
  • digital inputs ( 12pcs ) connected to the switches ( push button)
  • measuring input light level – connected to the light sensor
  • 7 other inputs are connected to sensors measuring temperature
  • 3 dimmers PWM outputs connected to LEDs showing the level of dimming lighting
  • Configuration set in the software eHouse (* demo)
• Set of connected sockets for data bus RS-485
• Set of connected sockets for power bus

Photo Module Demonstration :

Magnification Module Demonstration
The project was designed on the basis of the demonstration module ( evaluation ) is configured in the application file eHouse samples .zip , which should be unpacked to the root of eHouse ( so all files found in the directory “%EHOUSE_DIR%/samples/ ” ) .

Applications demo should run from the directory “%EHOUSE_DIR%/samples/bin/ ”